Turning radius went to crap
#26
Originally Posted by n3elz
The brake issue is primarily with Doetsch spindles, but can be an issue when the front brakes are very worn and the caliper sticks out further.
I run no stops now and have no brake issues with the Fabtech either.
I run no stops now and have no brake issues with the Fabtech either.
#27
so i'm putting my fabtech spindles on this weekend..should i just completely grind off my stock steering stops? that will cause no problem with breaking if i've read correctly..it doesn't seem like anyone has made it clear that my stock break lines will be too short. will they work? if there's anything else i'm missing out on here please inform me, i'm reading up but could miss something.
#29
Yes, it wont hurt braking or ANYTHING if you grind off the steering stops, it actually saves you from loosing brake pressure if you make a turn too sharp. As for the brake lines, FOR A TEMPORARY FIX you can just unbolt the bracket that hold the hard line to the side of the frame and let it droop. It gives the lines enough play through flex and turning until you can get new lines or make a new bracket.
Thread
Thread Starter
Forum
Replies
Last Post