More suspension travel!
#1
Joined: Feb 2007
Posts: 668
Likes: 0
From: Woodland Hills, California
More suspension travel!
Hey guys, so this Christmas I'm looking into doing some more to my suspension... maybe some better shocks and I'm also looking to add just a couple more inches of travel on my front suspension.. I don't want to go all out with a Camburg or DBR kit, but I just want a few more inches of travel.
Any ideas?
Any ideas?
#2
#4
Joined: Feb 2007
Posts: 668
Likes: 0
From: Woodland Hills, California
http://sporttrucksuspension.com/RANGERLIFT.HTM
would those upper arms work? sorry, im not too sure what the "uniball" really means.
I mean I've pretty much limited it down to what you said Alon, with the new upper arms, shocks, and limit straps.
OR
take out my shock-inside-the-coil setup with the whole coil spring socket and replace it with custom shock hoops and coil-overs..
would those upper arms work? sorry, im not too sure what the "uniball" really means.
I mean I've pretty much limited it down to what you said Alon, with the new upper arms, shocks, and limit straps.
OR
take out my shock-inside-the-coil setup with the whole coil spring socket and replace it with custom shock hoops and coil-overs..
#6
#7
5.5kit...10-11" travel,
brandon at BTF same concept as camburg 5.5 but uses fabtech/doeshtech spindle and modifys it for uniball and a custom upper arm..
that is pretty much it without getting a long travel kit or a mid travel kit from blitzkrieg like flomaster on the forums..
and if you dont want to fork out the cash for the 2.0 shocks, FOX makes a bolt in shock that is able to be revalved and bolts in factory locations. that is what i will be running when i get the camburg 5.5 on my truck in about a month. my front will be 10" travel and i will be limiting my rear to whatever i can get with factory locations and the FOX shocks since i dont want to cut the bed up.
brandon at BTF same concept as camburg 5.5 but uses fabtech/doeshtech spindle and modifys it for uniball and a custom upper arm..
that is pretty much it without getting a long travel kit or a mid travel kit from blitzkrieg like flomaster on the forums..
and if you dont want to fork out the cash for the 2.0 shocks, FOX makes a bolt in shock that is able to be revalved and bolts in factory locations. that is what i will be running when i get the camburg 5.5 on my truck in about a month. my front will be 10" travel and i will be limiting my rear to whatever i can get with factory locations and the FOX shocks since i dont want to cut the bed up.
#11
Blue Torch Fab
www.bluetorchfab.com
At least that what that means on the East Coast hahaha...
I wheeled with these guys when they were down here once.
www.bluetorchfab.com
At least that what that means on the East Coast hahaha...
I wheeled with these guys when they were down here once.
#12
Originally Posted by rolla_guy72
i guess that works too
but its for Brandon and Travis Fab
They are two brothers that both do fab work from their garages
#15
Here is a picture of the BTF kit...
http://viewmorepics.myspace.com/inde...mageID=9076167
http://viewmorepics.myspace.com/inde...mageID=9076152
http://viewmorepics.myspace.com/inde...mageID=9076167
http://viewmorepics.myspace.com/inde...mageID=9076152
Thread
Thread Starter
Forum
Replies
Last Post