Coilover Brackets by ME00stepside (NO LONGER AVAILABLE AS OF 7/23/2021)
#1426
#1427
#1430
#1432
UPDATE!!
Guys, this is going to be pushed back a month or so. I just found out last night that my brother-in-law (my machinist) had to go back in for major surgery, and he will be out of commission for a few weeks. He has the stock, but he's not going to be able to cut the parts for a little while.
I'll keep you guys updated. Hopefully all goes well.
Guys, this is going to be pushed back a month or so. I just found out last night that my brother-in-law (my machinist) had to go back in for major surgery, and he will be out of commission for a few weeks. He has the stock, but he's not going to be able to cut the parts for a little while.
I'll keep you guys updated. Hopefully all goes well.
#1433
Current Round:
1. newfy - Powder Coated – USA
2. What7u - Raw – Canada
3. DarrylB791 - Powder Coated - Canada PAID
4. Frogg0811- Powder Coated – USA PAID
5. 00loneranger- Powder Coated – USA
6. Wtrskiadic- Powder Coated –USA
7. Police Interceptor - Powder Coated- USA (stainless hardware if still available) PAID
8. AC3.0 - Powder Coated – USA
9. joshuaj0214- Powder Coated- USA
10. Fooie622- Powder Coated – Australia PAID
11. Ranger ***** - Powder Coated - USA PAID
12. 32vsnake- Powder Coated -Canada PAID
13. Woovie - Powder Coated – USA
14. 03SLVRFX4 - Powder Coated – Canada
15. 5.0FOX - Powder Coated- USA
16. walky - Powder Coated - USA
17. Blacktruckbrown- Powder Coated- USA PAID
18. Dono1 - Powder Coated - Canada (stainless hardware if still available) PAID
1. newfy - Powder Coated – USA
2. What7u - Raw – Canada
3. DarrylB791 - Powder Coated - Canada PAID
4. Frogg0811- Powder Coated – USA PAID
5. 00loneranger- Powder Coated – USA
6. Wtrskiadic- Powder Coated –USA
7. Police Interceptor - Powder Coated- USA (stainless hardware if still available) PAID
8. AC3.0 - Powder Coated – USA
9. joshuaj0214- Powder Coated- USA
10. Fooie622- Powder Coated – Australia PAID
11. Ranger ***** - Powder Coated - USA PAID
12. 32vsnake- Powder Coated -Canada PAID
13. Woovie - Powder Coated – USA
14. 03SLVRFX4 - Powder Coated – Canada
15. 5.0FOX - Powder Coated- USA
16. walky - Powder Coated - USA
17. Blacktruckbrown- Powder Coated- USA PAID
18. Dono1 - Powder Coated - Canada (stainless hardware if still available) PAID
REMINDER: this is the end of this round. Once it is over, I will start another round if there is interest.
#1435
Might I make a suggestion?
After reading through this thread and being told to "look on the last few pages" for the correct pricing and ordering information, why not just update the first post, or, start a new thread in which you can edit the first post?
Thanks from a newbie
After reading through this thread and being told to "look on the last few pages" for the correct pricing and ordering information, why not just update the first post, or, start a new thread in which you can edit the first post?
Thanks from a newbie
#1438
#1441
Is this what your referring to?
http://sweb.uky.edu/~mwke224/Coilove...%20Rangers.pdf
http://sweb.uky.edu/~mwke224/Coilove...%20Rangers.pdf
#1447
For you guys doing the swap,
today I snapped a coil over shaft and bent the other on the 2.0 emulsion with 5/8 shaft. This set up did me well for street use and street use in the snow.
If you offroad and dont just mall crawl seriously consider the 2.0 nitrogen charged air shock since it has a 1 1/4 " shaft. It should be far stronger.
I'll put my story on another thread.
today I snapped a coil over shaft and bent the other on the 2.0 emulsion with 5/8 shaft. This set up did me well for street use and street use in the snow.
If you offroad and dont just mall crawl seriously consider the 2.0 nitrogen charged air shock since it has a 1 1/4 " shaft. It should be far stronger.
I'll put my story on another thread.
#1448
For you guys doing the swap,
today I snapped a coil over shaft and bent the other on the 2.0 emulsion with 5/8 shaft. This set up did me well for street use and street use in the snow.
If you offroad and dont just mall crawl seriously consider the 2.0 nitrogen charged air shock since it has a 1 1/4 " shaft. It should be far stronger.
I'll put my story on another thread.
today I snapped a coil over shaft and bent the other on the 2.0 emulsion with 5/8 shaft. This set up did me well for street use and street use in the snow.
If you offroad and dont just mall crawl seriously consider the 2.0 nitrogen charged air shock since it has a 1 1/4 " shaft. It should be far stronger.
I'll put my story on another thread.
#1449
Here is his thread: https://www.ranger-forums.com/genera...arnage-141634/
Summary: He was going about 30 and he "caught maybe a few inches of airtime" and he crashed down on the upslope of the following bump.
I would agree, it looks like he needs a lot more than the standard coilover conversion if you have the potential to catch air....
Summary: He was going about 30 and he "caught maybe a few inches of airtime" and he crashed down on the upslope of the following bump.
I would agree, it looks like he needs a lot more than the standard coilover conversion if you have the potential to catch air....