Coilover Brackets by ME00stepside (NO LONGER AVAILABLE AS OF 7/23/2021)
#1326
Hey guys I have my set that I have decided I won't be getting into this project. I just don't have time for it. (And once I do, I might have bigger plans....) No use having them sit around, so I'll sell mine for what I paid, $307 shipped in the contiguous US.
Powdercoated version. only been out of the box to look at them.
Powdercoated version. only been out of the box to look at them.
#1333
#1334
#1335
Mine are 11 in travel with a 30 in extended ill see if I can find a pic with it on the bump stop. I was real worried when I first bolted them up but have had 0 problems.
#1337
geometry wouldn't vary that drastically from
1 side of the axle articulated and on the bump stops vs both sides hitting.
There is some counter rotation on articulation from the swing shackles but most of that comes from play in the bushings the travel should remain square and in plane to the vehicle if one side is moving up or both.
I'm no expert on the matter but physics would say if it works on one side it should work on both and on a bump hitting both wheels you have twice the compression damping from both springs counter acting the hit as opposed to just one. So it's less likely to fully bottom unless your hitting obstacles really hard ie jumping which my trucks not built for. It may not be utilizing every mm of compression room in the springs but it works well.
I'd like to cycle it and make sure they are not bottoming but it has worked great for the past 2 years.
#1338
#1339
#1342
Latest Pricing:
Kit with powdercoated brackets: $290
Kit with raw brackets: $270
Shipping:
$17 US
$46 Canada
Kit includes:
4 brackets (2 upper, 2 lower)
4 gussets to reinforce shock tower
2 shock tower spacers for upper mounts
8 rod end spacers (for 1/2" wide rod ends--like Fox)
All hardware to install--grade 8 zinc plated
What else you will need:
2 coilover shocks
2 coil springs
2 limit straps and brackets
You may need bump stops if you are lifting your truck at the same time, but if you already have a Superlift, or if you are remaining at stock height, you can reuse what you have. You simply need to trim back the bracket on the frame where the bump stop mounts, so that the coilover will clear it. You then redrill a hole in the remaining part of the bracket and mount the bump stop further in.
If you are going to purchase in the next round, please put your name on the list. Include if you want raw or powdercoat, and US or Canada.
The next run can be February if enough people are interested. I have had numerous PMs over the last couple of months stating that people want them, and I have asked each person to put their name on the list, but to date, no one has.
Kit with powdercoated brackets: $290
Kit with raw brackets: $270
Shipping:
$17 US
$46 Canada
Kit includes:
4 brackets (2 upper, 2 lower)
4 gussets to reinforce shock tower
2 shock tower spacers for upper mounts
8 rod end spacers (for 1/2" wide rod ends--like Fox)
All hardware to install--grade 8 zinc plated
What else you will need:
2 coilover shocks
2 coil springs
2 limit straps and brackets
You may need bump stops if you are lifting your truck at the same time, but if you already have a Superlift, or if you are remaining at stock height, you can reuse what you have. You simply need to trim back the bracket on the frame where the bump stop mounts, so that the coilover will clear it. You then redrill a hole in the remaining part of the bracket and mount the bump stop further in.
If you are going to purchase in the next round, please put your name on the list. Include if you want raw or powdercoat, and US or Canada.
The next run can be February if enough people are interested. I have had numerous PMs over the last couple of months stating that people want them, and I have asked each person to put their name on the list, but to date, no one has.
#1347
Guys, when you add yourself to the list, please copy it from the last person and then add yourself. This keeps the list together.
1. newfy - powdercoated - USA
2. boyd_835 - powdercoated - USA
3. What7u - raw - Canada
Thanks!
Paypal: sbeau1 [at] metrocast [dot] net
1. newfy - powdercoated - USA
2. boyd_835 - powdercoated - USA
3. What7u - raw - Canada
Thanks!
Paypal: sbeau1 [at] metrocast [dot] net
#1350