5.5in.????
#2
A 5.5 doesn't exist for the Edge, you can only go as high as 3.5 spindle and [ugh] body lift [/can't believe I said that] to get higher. Tires help as well. If you wan't a quality kit that will give you performance as well look into the Camburg 6.0 Kit.
http://camburg.com/fordsprodEDGE.html
http://camburg.com/fordsprodEDGE.html
#4
Well, you have a 3" BL and you can either get the Camburg 6.0 that starts at $1950 which is a 3.5" spindle lift (Crank the torsion bars for the extra 2.5" for 6" total) with a new upper control arm and you can also get it with dual Bilstein shocks. www.camburg.com
You can also get the RCD lift kit that replaces the Torsion bars with a coilover and runs about $2400. www.racecardynamics.com and www.rockymountainsusp.com
Then you can get a spindle (4-5 different brands) which will run you about $350-$400 and then you'll have to do something for the rear.
When/if I do a spindle lift, I'd be replacing the T-bars for "F" bars from a FX4 Level2 and some Bilstien HD shocks and 4" lift shocks in the rear with some Skyjacker 6" leaf springs and removing the stock rear block (equals 4" of lift).
You can also get the RCD lift kit that replaces the Torsion bars with a coilover and runs about $2400. www.racecardynamics.com and www.rockymountainsusp.com
Then you can get a spindle (4-5 different brands) which will run you about $350-$400 and then you'll have to do something for the rear.
When/if I do a spindle lift, I'd be replacing the T-bars for "F" bars from a FX4 Level2 and some Bilstien HD shocks and 4" lift shocks in the rear with some Skyjacker 6" leaf springs and removing the stock rear block (equals 4" of lift).
Thread
Thread Starter
Forum
Replies
Last Post
For Sale: 7.5in rear end 4:10s (NorCal)
2004xlmiller
OLD - Engine & Drivetrain
4
02-28-2013 03:51 PM
Want to Buy: 1.5in 08+ Rear block - WA
mikerider
OLD - Suspension, Tires, & Wheels
4
10-19-2011 06:51 PM