whats a typical idle for a 2.5l engine?
#1
#6
its $30 at autozone, and mine was making my truck run like **** long before throwing a cel, once it did throw a cel id be idling at 3k haha.
its right on the back of the intake mani dead center in the back of the engine, when you replace it its a ***** to get the phillips screws out, i used a ratchet with the phillips bit, i reccomend a magnet picker upper thing cause i kept dropping the bit. Also if you do replace, be careful not to lean on the low side A/C ... mine hasnt been that cold since and i tried to recharge with one of those universal kits and the **** went up to red on the gauge so i might try it again eventually
its right on the back of the intake mani dead center in the back of the engine, when you replace it its a ***** to get the phillips screws out, i used a ratchet with the phillips bit, i reccomend a magnet picker upper thing cause i kept dropping the bit. Also if you do replace, be careful not to lean on the low side A/C ... mine hasnt been that cold since and i tried to recharge with one of those universal kits and the **** went up to red on the gauge so i might try it again eventually
Thread
Thread Starter
Forum
Replies
Last Post
Bumpncarstereo
4.0L OHV & SOHC V6 Tech
4
08-23-2007 12:19 PM