Lift is on !! 56k stay away
#27
But the steering shaft actually wasn't moved from the firewall. The bigger shaft was just lowered over the smaller shaft, and the extension was put in that way. Would this still affect the boot?
So if I back off the body bolts a bit, it will smooth out the ride? I noticed the instructions say they should be tightened to certain specs, however I have no way to measure that.
#34
Shifting got a bit tighter as well. I need to trim my shifter bezel because its rubbing in 2nd and 4th.
No direct pics from the front. Camber/caster was not affected at all.
Tyler, the lift really wasn't as bad as I thought it was. Like I said, worst part were the front body mounts. I'd defnitely recommend having one helper.
No direct pics from the front. Camber/caster was not affected at all.
Tyler, the lift really wasn't as bad as I thought it was. Like I said, worst part were the front body mounts. I'd defnitely recommend having one helper.
#35
Thread
Thread Starter
Forum
Replies
Last Post
lumpy4000
Meets, Greets, & Events
39
12-24-2009 04:14 PM
Fx4wannabe01
Snapshots
40
07-12-2008 06:21 PM
Fx4wannabe01
Snapshots
26
05-16-2008 10:01 AM