Ford Rules Extended Radius Arm Build
#26
#30
#34
#37
Im not sure if i will change it again or not ill probably forget to do it but i am going to weld the inside and outside so it will have plenty of weld.
Zach how did you put the arms in the lathe i assume you put the stud in the lathe and clamped onto that?
Anyways heres pics of the truck tonight
Zach how did you put the arms in the lathe i assume you put the stud in the lathe and clamped onto that?
Anyways heres pics of the truck tonight
#38
Im not to worried about bending them if white rhino never bent his and he does way more rocks then i ever will get to do. its mostly trails and mud around here and the dunes off course
#41
Thats what he told people, same as mine 2"od 1.5"id so i am sure i wont bend them if i do oh well
So here is some pics of my one hours work this morning just have to pull the bolts off the radius arm and shes out.
I need some advice from you guys do you think it would be a good or bad idea to weld a tube vertically to my upper coil bucket and then not attach the coil to the top off the bucket so the coil can drop out as much as it can i have seen it done and it seams to work pretty good. kinda like this.
So here is some pics of my one hours work this morning just have to pull the bolts off the radius arm and shes out.
I need some advice from you guys do you think it would be a good or bad idea to weld a tube vertically to my upper coil bucket and then not attach the coil to the top off the bucket so the coil can drop out as much as it can i have seen it done and it seams to work pretty good. kinda like this.
#45
#46
Right to the frame but if i did it again i would have plated it but it has held up fine for about a year now.
#47
Couple pics
all washed up
primered
steering stablizer and tranny mount
Last edited by ford rules; 07-30-2009 at 11:56 AM.
#49