The Budget Baja Build
#757
ill probably rhino line the inside later down the road. its 2 am, im exhausted, started at 10:30. ran into a bunch of snags but got one side mounted. it rides great!
placed my bed on my creeper
droop
ride height
dam near perfect angle, will probably be spot on with the bed weight.
thats all for tonight, im beat.
oh, full drop to the bottom of the stock bump stop, 15.5"
that'd be sweet if i get it. the driveshaft even clears the crossmember by about two mill
placed my bed on my creeper
droop
ride height
dam near perfect angle, will probably be spot on with the bed weight.
thats all for tonight, im beat.
oh, full drop to the bottom of the stock bump stop, 15.5"
that'd be sweet if i get it. the driveshaft even clears the crossmember by about two mill
#759
#767
yep. the problem is the glass hardened flat, and has to be pulled in to fit. being that its thick glass vs a sheet of metal, its trying to pull it towards the cab. i need to fab a support bar to hold it where it needs to be. for tonight i put a ratchet strap on it, should be OK till the morning.
#768
#773
#774
#775
minimal update, but still progress. the axle is now in a position where with a bit of wrench time i can have it ready to swap over.
Awesome! big thanks to my buddy for letting me use his angle finder and his stick welder. that thing BUZZED those perches on no problem!
Picked up the brakes, and seals. my stack of axle parts keeps growing.
Awesome! big thanks to my buddy for letting me use his angle finder and his stick welder. that thing BUZZED those perches on no problem!
Picked up the brakes, and seals. my stack of axle parts keeps growing.