You are looking at a USED set of both left and right OEM Ford rear disc brake caliper / axle flange adapter brackets for a 1994-2004 Ford Mustang base model (V6) or GT. These brackets bolt to the rear axle tubes, and in turn the brake calipers bolt to the brackets. The parts carry OEM Ford part number F4ZC-2C10X-AD, and are stamped with the same part number on both the left and right sides. The brackets are distinguished by a stamped "L" (for left) and "R" (for right).

These parts come from a 1998 Ford Mustang GT that I am parting out. The car had about 160,000 miles when parked. It ran well, I just replaced it with a newer vehicle. Therefore I have no longer have any use for these, and offer them up here.

The parts are in acceptable shape cosmetically, and excellent shape functionally. I believe they came from the factory galvanized or otherwise coated, but quite a bit of surface rust has set in. The threads for the brake backing plate bolts are not gouged or stripped, and the parts thread together with a wrench. You may want to clean the threads up a bit and use some anti-seize on installation. The bolt holes where the calipers are mounted are clean and intact. All four bolt holes where the bracket is attached to the axle tube flanges are likewise intact. I have cleaned both brackets with a wire brush to remove all loose rust. This gets them one step closer if you would like to paint or powdercoat them, or, aside from the cosmetic surface rust, they are perfectly fine to bolt on as-is.

To the best of my knowledge, these parts are listed to fit all 1994-2004 Ford Mustang base (V6) or GT models. They will also work for a five-lug rear brake swap to a 1979-93 Fox-body Mustang as part of a larger package of factory swap parts, and I have used them to convert to covert to rear disc brakes on a late-model Ford Ranger with some cutting and chamfering. As far as I know, they will not work with the larger SN-95 Cobra brake setup. Please do your research with a dealership, parts store, or other reliable source to make sure these will work for your application.

$50 local pickup in State College, PA, $65 shipped anywhere in the United States, or best reasonable offer. International shipping available for an additional charge depending on destination.

 

SOLD!