Category: Clean Title
Status: Domestic

I have a 1999 Ford ranger for sale, in USA - North Carolina.

Engine Size: 5.0 V8


Asking price is $7500


Seller Information: David Brunton
Phone:
Email: davidbrunton6@yahoo.com


Need it gone NOW!!!! $7500 cash no trades no trailer come and get it. You can part it out and make that. I don't have the time or space for it anymore. My loss is your gain.


It's a 99 ranger Truggy with tube chassis from the cab back and from the cab forward.
Mechanically the truck is in great shape. The motor has less than 200 miles and the axles have been recently gone through. The body is … well it’s a little rough from years of crawling. Pretty much every panel is dented.
Ok here are some specs on the truck-
99 Ranger Cab and Bed sides
Custom Frame and Exo Cage with baja style spare tire carrier.
Engine-o
5.0L short block from a 90 Fox body (very low miles)
Gt40P heads (fresh)
Gt40 upper / lower intake
FRP B303 Cam
1.7r roller rockers
BBK shorty headers
Painless Performance stand alone wire harness w/ Fox body CPU
- Should be approximately 270-300hp depending on who you ask.
I have a Brand new BBS 70MM throttle body, a new IAC, and a new BBS 70MM MAF.
Drivetrain-
C6 Trans w/ Art Carr Shifter
Flipped D300 T-Case w/ cable twin sticks from Northwest fab
Tom Woods D-Shafts
Axles-
Front D44 (80 wagoneer)
5.13 Yukon gears
ARB Air locker
Superior Inner / Outer Shafts
Longfield 300m Joints
Aluminum tie rod
Rear Ford 8.8 (exploder)
5.13 gears
Detroit locker
Moser Alloy shafts
The steering was just gone through and a NEW Howe pump, resevoir and cooler were installed along with NEW lines. New BlueTorch high steer arm.
I have a big *** brand new high lift jack and mounts that will go for the right price.
37x12.5 Maxxis Trepador Stickies
Allied Rock-a-thon Aluminum bead locks (17x10)
Front Suspension-
3 link w/ Panhard
2x .25in DOM lower w/ Johny Joints
1.5x .25in DOM uppers w/ heims
14in Fox Air Shocks
Rear Suspension-
Triangulated 4 link
2x .25in DOM lowers w/ johny joints
1.5x .25in DOM uppers w/ heims
16in Fox Air shocks
Other-
PRP Highback seats w/ Crow harnesses
Alloy Fuel cell
Mallory fuel pump w/ all aluminum and braided steal plumbing
Warn 9.5Ti winch w/ Amsteel 5/16 rope (rope is parted needs to be spliced or replaced).
Autometer Voltage, Oil Pres, Water Temp and Trans temp gauges
CNC cutting brakes
Brand new Optima Battery
Also comes with all my spares including-
Front and Rear Shafts
Front Hubs
Trans
Tons of misc heims / brackets / engine stuff.
I can deliver within reason.

If you have any questions please e-mail me at davidbrunton6@yahoo.com

Here are links to a snapfish and photobucket albums:

http://www2.snapfish.com/snapfish/fe...A%22s%22%7D%7D

http://s257.photobucket.com/albums/h...cpZZ1QQtppZZ28

Located in Charlotte NC
Thanks for looking

 

I wondered where that truck went to.

 

Bumpski