WTT: 03 Bed for a Stepside Bed -OH
#1
WTT: 03 Bed for a Stepside Bed -OH
I have an 03 FX4 Regular Bed and want to trade it for a step side. Anybody? Mine is in great shape, does have two holes where the toolbox is mounted. The paint code is TS which is Silver Frost Pearl Metallic.
I have a shop that we could do the swap in, so please let me know.
I have a shop that we could do the swap in, so please let me know.
#9
Now we are talking! I don't have my camera here but I will get some shots later today. The paint code is TS which is the silver color. Check your door tag. We may have a winner folks!!!
#17
That is the same code. I am good to go then, just gotta find a time to do it. If you were coming to the spring meet on the 11th here, that would be good, otherwise, lets look at what weekends we can meet and if beard will be around, he has offered his garage for the swap. My thought was if we timed this right, I have a PA 3" lift that I want to install, so what better time than when the bed is off anyway...
Let me know what your schedule looks like and we can go from there.
Let me know what your schedule looks like and we can go from there.
#18
Member
iTrader: (4)
Join Date: Aug 2007
Location: Central, Illinois
Posts: 3,450
Likes: 0
Received 0 Likes
on
0 Posts
I can do any day just pick a date and i can get it off.
i have a few questions can you get some pics of the holes you are talking about and does your bed have a bedliner or anything?
and i think meeting at beards would be our best bet since its about half way for both of us.
i have a few questions can you get some pics of the holes you are talking about and does your bed have a bedliner or anything?
and i think meeting at beards would be our best bet since its about half way for both of us.
#21
they dont need to be welded just set then inbetween the bed and frame and tighten down there a tad taller then the gap needed and will get sandwiched inbetween
#22
I will try and get some pics this weekend, the holes are up front and about 3/8". They were used to bolt the tool box down instead of using the j-bolts that came with it. Beards is cool, and a sunday afternoon would work, I figure it should take about 3-1/2 hours for me to get there.
My next 2 weekends are booked solid, so maybe April 5th or the or the 19th? To make it easier, I'll do the body lift another time.
My next 2 weekends are booked solid, so maybe April 5th or the or the 19th? To make it easier, I'll do the body lift another time.
#23
Member
iTrader: (4)
Join Date: Aug 2007
Location: Central, Illinois
Posts: 3,450
Likes: 0
Received 0 Likes
on
0 Posts
yea i remember guys doing that here and they fell out....
I will try and get some pics this weekend, the holes are up front and about 3/8". They were used to bolt the tool box down instead of using the j-bolts that came with it. Beards is cool, and a sunday afternoon would work, I figure it should take about 3-1/2 hours for me to get there.
My next 2 weekends are booked solid, so maybe April 5th or the or the 19th? To make it easier, I'll do the body lift another time.
My next 2 weekends are booked solid, so maybe April 5th or the or the 19th? To make it easier, I'll do the body lift another time.
Thread
Thread Starter
Forum
Replies
Last Post
Want to Trade: WTT: Flareside bed for Styleside bed - MO
01RangerEdge
OLD - Interior, Exterior, Electrical, & Misc.
12
06-10-2013 11:29 AM
Quasi242
OLD - Interior, Exterior, Electrical, & Misc.
20
03-06-2011 07:34 PM
Want to Trade: WTT (IN) Fleetside for oxford white Stepside
TrndAssassin
OLD - Interior, Exterior, Electrical, & Misc.
0
06-22-2010 12:59 PM
uscgranger
OLD - Interior, Exterior, Electrical, & Misc.
1
12-13-2009 10:33 PM
HighRollerII
OLD - Interior, Exterior, Electrical, & Misc.
2
03-23-2009 09:34 AM