FOR SALE IS A HARD TOPPER/TONNEAU COVER OFF MY 01 FORD RANGER EDGE.

GOOD-----

-HARD PLASTIC WITH WEATHER STRIPPING AROUND THE EDGES AND HINGE FOR A WATER TIGHT SEAL.

-YOU DONT HAVE TO DEAL WITH ROLLING UP MATERIAL AND SNAPPING 30 BUTTONS

-HYDROLIC SHOCK TO HOLD UP OUT OF THE WAY WHILE YOU LOAD AND UNLOAD ITEMS INTO BED

-FOLDS COMPLETELY OVER ONTOP OF ITSELF TO GET COMPLETELY OUT OF THE WAY GOES BOTH WAYS

-CAN BE TAKEN ON AND OFF IN SECONDS WIT THE FLICK OF A CLIP, UNLIKE MOST TOPPERS WHERE YOU DEAL WITH MATERIAL AND BUTTONS.

-HASSEL FREE USE

- DUE TO THE HARD PLASTIC NO WORRIES OF RIPS OR TEARS

-POSSIBLE EVEN BE STOOD ON IF NEEDED. DEPENDING ON WEIGHT

-STRAPS AND CLIPS ON EACH UNDERNEATH CORNER TO CLIP IT DOWN IF WANTED

-POSSIBLE INCREASE IN GAS MILEAGE

-ABLE TO HAVE THINGS IN BED OUT OF SIGHT AND HIDDEN

BAD-----

-KEY LOCK IS BROKEN

-EASIER TO TAKE OFF WITH 2 PEOPLE BUT HAVE DONE IT ALONE MORE THEN A FEW TIMES

PICTURES BELOW

NOTE: THE DIRT IN THE PICTURE NEEDS TO BE WASHED OFF AND THERES ALITTLE SURFACE RUST ON THE BLACK METAL HINDGE THAT ILL CLEAN OFF.

IF YOU HAVE ANY ADDITIONAL QUESTIONS PLEASE E-MAIL ME AT UGP032003@YAHOO.COM OR FOR A FASTER RESPONCE CALL ME AT 1-386-503-0837

THANK YOU

 

thats nifty. wish i was closer

 

how much ?
and it looks like some rusting on that clip/hinge, how bad is it ?
where is the key lock located and how hard would it be to replace ?

 

What brand is that cover?? Just curious..

GB :)

 

Im not sure what brand it is it came on the truck when I bought it.

the rust is surface rust from it being stored outside but It will come off with a abbrasive pad, its not rusted all the way through or anything.

the key is located at the top left of the cover near the cab if you could find the part it would be easy to fix but the cover has no numbers or names on it. if you tailgate doesnt lock its pointless to lock the topper though and rangers dont have locking tailgates to my knowledge.

Im taking offers but I see that painted fiberglass toppers are going from 600to800 and the material ones are going from 200 to 400. So Id just like to get something fair for it its more comparable to the fiberglass ones due to the fact that its harb plastic very durable has shocks to hold it up and is waterproof. I also know that its used so I dont know whats fair to ask If I could find how much this exact one was new Id have a better Idea.

 

The top is Ford, factory. I have the same one. I broke the lock cylinder and it is keyed to the ignition. Cost me about $120 to get a new one from Ford.

 

I looked and that surface rust came off with just wipeing it and it was mostly just some debre from the ground

 

Thanks for the reply.. I wish you were closer. That'd look great on my black Edge..

Good luck with your sale!!

Here's all of em you could ever ask for!! http://www.allworldautomotive.com/au..._ots22006.html


GB :)