For Sale: L1224R LED tail light conversion kit: much better than stock! (IL)
#54
Yes, they work on any of the ranger tails. I also use these on Corvettes and STi's. It will work on basically any ford truck that uses 3157 tail light bulbs stock.
#55
I just got a pair off another member on here. Is there any specific way to connect the wires off the L1224R harness? What wire is ground / signal / stop? The L1224R harness has grey/blue , grey/green, grey/red wires on it. Also, can I get replacement harnesses at an electrical store? (i.e. Radio Shack or online)
Green - ground
Blue - positive running light (dimmer mode)
Red - positive brake or turnsignal light (brighter mode)
#58
Yes, they will fit. You have separate amber turn signals in your 94 so these will be brake lights and running lights. You can install these yourself in an hour or so, you just need to buy the parts.
#66
#68
alon....from the side at night with the running lights, yes they are dimmer than factory incandescants. But anything else, like from behind and when the brakes are hit, there is a HUGE improvement over incandescants.... Witnessed this personally shortly after I installed mine. Compared mine to Trevors and we both had the same tail housings.
something is up with your stuff or how the bulb is positioned in the housing.
something is up with your stuff or how the bulb is positioned in the housing.
#69
you might have bought some defective LEDs from someone else, mine are guaranteed to give better results than stock.
#70
They are yours and I was given them because the other truck was traded in.... not sure how they could be defective but it seems like they arent as bright as my stock ones, guess I'll have to park next to another ranger and see.
#71
Alon,
Knowing you're technical, etc, I'm gonna skip the standard electrical connection, reflective material, etc. questions. lol
So it leaves us with bad LED's, jostled connection within the actual LED mount, corrosion in the mount....
Knowing you're technical, etc, I'm gonna skip the standard electrical connection, reflective material, etc. questions. lol
So it leaves us with bad LED's, jostled connection within the actual LED mount, corrosion in the mount....
#72
Hm.... Also, when it blinks it kind of shutters and flickers, not just on/off. Is that normal for these?
#73
Mine sorta "pulses" when the signals are flashing. Not when the brakes are hit. I think mine is an issue related to the flasher. Trevor's does the same thing.
#75
Both of my trucks (03/04) come one perfectly solid with the VLEDs flashers when the trucks are running. With the engine off and flashers on they come on slightly brighter at first and then dim the tiniest amount before flashing back off. This is normal due to the way the circuitry is inside of the L1224R heatsink.