OLD - Interior, Exterior, Electrical, & Misc. Ford Ranger interior, exterior, and electrical parts, i.e. overhead consoles, speakers, lights, bumpers, doors, wiring. This sub-forum is also for ads which list multiple Ford Ranger items per thread.

For Sale: Explorer Sport Trac full-length center console - MI

 
Thread Tools
 
Search this Thread
 
  #1  
Old 10-17-2009
steev's Avatar
Thread Starter
|
Member
iTrader: (2)
Joined: Sep 2008
Posts: 138
Likes: 0
From: Grand Rapids, MI
Explorer Sport Trac full-length center console - MI

Dark grey full-length center floor console out of a Ford Explorer Sport Trac. The lid and the cubby/storage bin is not included. The cup holder for the rear of the unit is also not included. None of this stuff was still there when I pulled it at the junkyard. The rear audio and HVAC controls are included. I cleaned it up and it looks pretty good. It does include the ducts, wiring and actual HVAC unit (mounted underneath it). It's pretty heavy, so I'd rather not ship and sell it locally. I'm in Grand Rapids, MI (49534). Please PM me or email me any questions at stevenmckiernan at gmail dot com.

$90 OBO









 
  #2  
Old 11-08-2009
steev's Avatar
Thread Starter
|
Member
iTrader: (2)
Joined: Sep 2008
Posts: 138
Likes: 0
From: Grand Rapids, MI
bump!
 
  #3  
Old 11-08-2009
01RangerEdge's Avatar
Scrambles the DeathDealer
iTrader: (11)
Joined: Jul 2009
Posts: 7,579
Likes: 5
From: Jackson, MO
so that console is a direct fit to the rangers? I've seen the expo consoles and wondered if the sport trac ones were any different
 
  #4  
Old 11-08-2009
steev's Avatar
Thread Starter
|
Member
iTrader: (2)
Joined: Sep 2008
Posts: 138
Likes: 0
From: Grand Rapids, MI
Yes...it is. I have one in my 98. I think the only real difference is with the cup holder/cubby section.
 
  #5  
Old 11-08-2009
01RangerEdge's Avatar
Scrambles the DeathDealer
iTrader: (11)
Joined: Jul 2009
Posts: 7,579
Likes: 5
From: Jackson, MO
Do you know what the diff is?

Btw this console is very tempting, i just want to know how much I need to spend to get the remaining pieces
 
  #6  
Old 11-08-2009
evilclown312's Avatar
Member
iTrader: (3)
Joined: Dec 2008
Posts: 2,772
Likes: 1
From: Logan ohio
Originally Posted by 01RangerEdge
Do you know what the diff is?

Btw this console is very tempting, i just want to know how much I need to spend to get the remaining pieces
Good luck finding the armrest at a decent cost.. Atleast i haven't been able too.
 
  #7  
Old 11-08-2009
steev's Avatar
Thread Starter
|
Member
iTrader: (2)
Joined: Sep 2008
Posts: 138
Likes: 0
From: Grand Rapids, MI
Originally Posted by 01RangerEdge
Do you know what the diff is?

Btw this console is very tempting, i just want to know how much I need to spend to get the remaining pieces
From what I've seen, the ST cup holder piece is all one piece, has a big cubby in the front, and one large and one small cup holder...one in front of the other. For the regular Explorer, it's two pieces. There's a large cubby in the front and two smaller cup holders in the back. I can't be sure if the regular ex pieces would work on the ST console, but I'd imagine they would. I've bought them for 10 bucks at a junkyard before.

Originally Posted by evilclown312
Good luck finding the armrest at a decent cost.. Atleast i haven't been able too.
I can get the arm rest here for about 10 bucks, but it would need to be recovered. As I mentioned previously (may have been another thread), I got my arm rest covered for 20 bucks at an upholstery place. You can get the upholstery kit on ebay for about 20 and do it yourself with a staple gun.

-steev
 

Last edited by steev; 11-08-2009 at 12:46 PM.
  #8  
Old 11-08-2009
Tys 4x4 FTW's Avatar
RF Veteran
iTrader: (8)
Joined: Jul 2008
Posts: 6,575
Likes: 2
From: Las Vegas, Nevada
ouch that's expensive. got mine with everything i needed for 22 bucks at a junkyard.

good luck with the sale! and lids are very hard to find. lol
 
  #9  
Old 11-08-2009
evilclown312's Avatar
Member
iTrader: (3)
Joined: Dec 2008
Posts: 2,772
Likes: 1
From: Logan ohio
Originally Posted by steev
From what I've seen, the ST cup holder piece is all one piece, has a big cubby in the front, and one large and one small cup holder...one in front of the other. For the regular Explorer, it's two pieces. There's a large cubby in the front and two smaller cup holders in the back. I can't be sure if the regular ex pieces would work on the ST console, but I'd imagine they would. I've bought them for 10 bucks at a junkyard before.



I can get the arm rest here for about 10 bucks, but it would need to be recovered. As I mentioned previously (may have been another thread), I got my arm rest covered for 20 bucks at an upholstery place. You can get the upholstery kit on ebay for about 20 and do it yourself with a staple gun.

-steev
Really wanna get me one and ship it to me ?
 
  #10  
Old 11-08-2009
TrucknGolf's Avatar
Member
Joined: Nov 2008
Posts: 1,829
Likes: 0
From: Colorado
^^ i got mine for like 16.. Just you have to find one at a pick n pull
 
  #11  
Old 11-08-2009
paintballer4758's Avatar
Joined: Aug 2009
Posts: 235
Likes: 0
From: Renton, WA
i got mine for 150
But that was power leather seats and the console and all bracketry...
good luck with the sale
 
  #12  
Old 01-14-2010
steev's Avatar
Thread Starter
|
Member
iTrader: (2)
Joined: Sep 2008
Posts: 138
Likes: 0
From: Grand Rapids, MI
bump! Make me an offer and it's yours!
 
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SteveOh
OLD - Interior, Exterior, Electrical, & Misc.
8
07-18-2010 02:12 AM
RangerJustin
OLD - Interior, Exterior, Electrical, & Misc.
7
03-17-2010 08:24 PM
Tys 4x4 FTW
OLD - Interior, Exterior, Electrical, & Misc.
0
06-27-2009 03:04 AM
robj749840
Interior Semi-Tech
9
08-22-2008 04:05 PM




All times are GMT -6. The time now is 11:32 PM.