Checking Interest: Custom Dakota Digital cluster retrofit - ME
#1
Custom Dakota Digital cluster retrofit - ME
I'm just seeing if there is any interest out there for this.
I've got a Dakota Digital VFD3-ORIG6 currently installed in another cluster housing, but I can retrofit these to another housing and make a new blackout lense if someone is interested. The lense completely blacks out when the vehicle is off, and everything lights up blue when on. These have a small computer box (a little smaller than an engine control module) with a long ribbon cable to the gauges them selves. The hookups to the box are individual inputs, just as with any aftermarket gauges.
I'm looking to get $800 plus shipping for the setup as it is, but if someone wants it retrofitted into another cluster, I'll do the work for an additional $50 plus the cost of the cluster core (or you can send me one). The cost to order this new from DD is $1200 plus shipping.
It has less than 25 miles on it. It can also be sent back to Dakota Digital and have your mileage put into the odometer for a small fee, but I don't know off the top of my head what this is.
Note that the labels do not actually light up. I believe that image (from the Dakota Digital wesite) was of a prototype. The lense has engraved labels.
I've got a Dakota Digital VFD3-ORIG6 currently installed in another cluster housing, but I can retrofit these to another housing and make a new blackout lense if someone is interested. The lense completely blacks out when the vehicle is off, and everything lights up blue when on. These have a small computer box (a little smaller than an engine control module) with a long ribbon cable to the gauges them selves. The hookups to the box are individual inputs, just as with any aftermarket gauges.
I'm looking to get $800 plus shipping for the setup as it is, but if someone wants it retrofitted into another cluster, I'll do the work for an additional $50 plus the cost of the cluster core (or you can send me one). The cost to order this new from DD is $1200 plus shipping.
It has less than 25 miles on it. It can also be sent back to Dakota Digital and have your mileage put into the odometer for a small fee, but I don't know off the top of my head what this is.
Note that the labels do not actually light up. I believe that image (from the Dakota Digital wesite) was of a prototype. The lense has engraved labels.
Last edited by ME00Stepside; 04-16-2014 at 12:16 PM.
#4
LOL. Yeah, this is going to be for someone with a street truck. Since lifted off-road seems to be more common here, I'm guessing it's not likely it'll sell to a Ranger owner, but since I'm on the site, I wanted to post it up and see.
I figure that someone like Torkit would be interested. Someone that goes all out on their interior.
I figure that someone like Torkit would be interested. Someone that goes all out on their interior.
Last edited by ME00Stepside; 04-17-2014 at 06:24 AM.
#7
Here are a couple of pics of the unit outside of the vehicle, both powered up and unpowered, plus the controller box that it goes with. Let me know if you need any more info on the unit.
Thread
Thread Starter
Forum
Replies
Last Post
Jp7
General Technical & Electrical
1
03-28-2021 03:58 PM
Checking Interest: Custom HID RETROFIT Projector Headlights - MA
yuke175
OLD - Interior, Exterior, Electrical, & Misc.
44
03-13-2014 05:01 PM