Off Road Warehouse Fox, Bilstein, ORI Baja, JBA, AFE, MagnaFlow, K&N, RCD, Superlift, Deaver, Bestop and more - Ford Ranger Accessories

ORW COIL-OVER CONVERSION BRACKETS

Thread Tools
 
Search this Thread
 
  #1  
Old 12-03-2009
Off Road Warehouse's Avatar
Thread Starter
|
BANNED
iTrader: (1)
Joined: Jul 2009
Posts: 165
Likes: 0
From: San Diego, CA
ORW COIL-OVER CONVERSION BRACKETS

What you've all been waiting for. OFF ROAD WAREHOUSE has newly released the '98-present 4WD/2WD Edge Ranger Coil-Over conversion Brackets and Hardware. They are precision water jetted from 1/4" chromoly steel for strength and performance. Easy installation on any stock or lifted Ranger w/ a torsion front suspension. To install they require drilling (4) 3/8" holes and only minimal welding is required to install the shock tower gussets. The kits will include both upper shock tower mounts, a Left and Right lower shock mount, (4) 3/16" weld gussets, and all grade 8 hardware for installation. The cost of the Kits will be $175 a RF member exclusive.

ORW COIL-OVER CONVERSION BRACKETS-dsc_1804.jpgORW COIL-OVER CONVERSION BRACKETS-dsc_1805.jpg
 

Last edited by Off Road Warehouse; 01-07-2010 at 02:55 PM.
  #2  
Old 12-03-2009
KLC's Avatar
KLC
RF Veteran
iTrader: (29)
Joined: Nov 2007
Posts: 13,115
Likes: 5
From: New Mexico
Looks great!
 
  #3  
Old 12-03-2009
HighRollerII's Avatar
RF Veteran
iTrader: (4)
Joined: Jun 2004
Posts: 10,073
Likes: 4
From: Charleston, SC
mmmm nice beads!!!
 
  #4  
Old 12-03-2009
seed60's Avatar
RF Veteran
iTrader: (15)
Joined: Jun 2008
Posts: 5,584
Likes: 0
From: Mooresville, NC
Those are nice. You guys are awesome!!!

Will they include the spacer deal that goes on the top mount?
 
  #5  
Old 12-03-2009
Redneckstone's Avatar
Level III Supporter
iTrader: (2)
Joined: Jun 2004
Posts: 24,936
Likes: 9
From: usa
Looks great.
 
  #6  
Old 12-03-2009
RazorsEDGE's Avatar
There's no lifeguard in the gene pool
iTrader: (4)
Joined: Aug 2006
Posts: 7,789
Likes: 5
From: New Mexico
Nice brackets. The welds are a huge improvement over the previous brackets that were being made.
 
  #7  
Old 12-03-2009
mlw20lu's Avatar
Member
iTrader: (2)
Joined: Aug 2008
Posts: 1,825
Likes: 0
From: Loxahatchee, FL
nasssty
 
  #8  
Old 12-03-2009
zabeard's Avatar
who?
iTrader: (8)
Joined: Nov 2004
Posts: 26,044
Likes: 10
From: IN
very nice! huge improvements for the ranger... it is much needed! guys will love the advantage of basically bolt on coilovers.
 
  #9  
Old 12-03-2009
korey89's Avatar
Member
iTrader: (2)
Joined: Mar 2008
Posts: 4,672
Likes: 5
From: South, FL
NICEEEEEE


ORW FTW, I bet all the people who tried to needlessly say negative stuff about ORW don't know what to say now.
 
  #10  
Old 12-03-2009
Scrambler82's Avatar
Old Guy User…
iTrader: (12)
Joined: Jul 2009
Posts: 7,909
Likes: 77
From: SoCal
The welds are incredible , nice and even.
 
  #11  
Old 12-03-2009
GI_JO_NATHAN's Avatar
Member
iTrader: (2)
Joined: May 2007
Posts: 343
Likes: 0
From: Spartanburg, SC/Pensacola
Wow that's awesome! Great price too! So is there an average price range for the coil-overs?
 
  #12  
Old 12-03-2009
Fx4wannabe01's Avatar
RF Veteran
iTrader: (23)
Joined: May 2005
Posts: 21,721
Likes: 11
From: Boring, Oregon
Amazing work. Can't wait to make my order down the road....maybe as a total and complete kit...shocks, coils, brackets...BAM!
 
  #13  
Old 12-03-2009
David N's Avatar
Member
Joined: Dec 2008
Posts: 1,060
Likes: 0
From: Williamston, NC
Looks great. So what is the final cost after getting everything I would need to put this, and a set of coilovers on my stock height ranger? What coilovers do I need?
 
  #14  
Old 12-03-2009
Off-roadranger04's Avatar
Member
iTrader: (2)
Joined: Nov 2008
Posts: 1,751
Likes: 0
From: Newark, Delaware
can you list the grade 8 hardware??? Im not sure what to get. Thanks.
 
  #15  
Old 12-03-2009
RangerJustin's Avatar
Member
iTrader: (1)
Joined: Feb 2005
Posts: 4,428
Likes: 0
From: SoCal
Will need to keep watching this thread...sweetness.
 
  #16  
Old 12-03-2009
RangerJustin's Avatar
Member
iTrader: (1)
Joined: Feb 2005
Posts: 4,428
Likes: 0
From: SoCal
Oh I will gladly drop my truck off if you need to test something!! haha
 
  #17  
Old 12-03-2009
Dangerranger01's Avatar
Member
iTrader: (6)
Joined: Nov 2005
Posts: 2,011
Likes: 2
From: Boring/Corvallis, Oregon
Dude, where is it on the site? I see nothing official.



Also, what do you have to offer 2wd coil sprung guys? I've heard its an easy swap, but some say its a *****. lol..
 
  #18  
Old 12-03-2009
korey89's Avatar
Member
iTrader: (2)
Joined: Mar 2008
Posts: 4,672
Likes: 5
From: South, FL
Originally Posted by Dangerranger01
Dude, where is it on the site? I see nothing official.
Are you serious?
 
  #19  
Old 12-03-2009
Dangerranger01's Avatar
Member
iTrader: (6)
Joined: Nov 2005
Posts: 2,011
Likes: 2
From: Boring/Corvallis, Oregon
Originally Posted by korey89
Are you serious?
Serious as a heart attack.



Just curious. Dont bag me.
 
  #20  
Old 12-04-2009
ShadowRanger08's Avatar
Member
iTrader: (3)
Joined: Jan 2008
Posts: 1,694
Likes: 0
From: Ontario, Canada
damn those are nice, when im not poor im going to have to buy some of those for sure!
 
  #21  
Old 12-04-2009
08XLT4x4's Avatar
Member
iTrader: (7)
Joined: Mar 2008
Posts: 3,257
Likes: 2
From: bomba shack
can i buy just the hardware? (too lazy to figure out all the different sizes i need)
 
  #22  
Old 12-04-2009
camodown's Avatar
Lost in Nowhere
iTrader: (3)
Joined: Feb 2007
Posts: 5,022
Likes: 0
From: Midland, TX
yeah, don't forget about that spacer that goes on top of the shock tower
 
  #23  
Old 12-04-2009
Off Road Warehouse's Avatar
Thread Starter
|
BANNED
iTrader: (1)
Joined: Jul 2009
Posts: 165
Likes: 0
From: San Diego, CA
Working towards getting these on the site wanted to post them here first and get your guys feedback. The upper shock mount adapter/spacer is included in the hardware pack with the brackets. As for the coil-sprung 2wd rangers there would be some major modification needed to make room for the shocks, as well as, a custom shock mount needs to be fabricated to use a coil over. Camburg and Blitzkreig Motor Sports offer some great kits for the 2wd coil-sprung rangers.
 
  #24  
Old 12-04-2009
Off-roadranger04's Avatar
Member
iTrader: (2)
Joined: Nov 2008
Posts: 1,751
Likes: 0
From: Newark, Delaware
damn i should have held off on buying the brackets from jacob....
 
  #25  
Old 12-04-2009
MudSlanger's Avatar
Member
iTrader: (4)
Joined: Jun 2007
Posts: 1,462
Likes: 0
From: Phoenix, AZ
Those are nice, if i ever have a problem with my RCD brackets, ill definetly look in to yours!
 



All times are GMT -6. The time now is 02:38 AM.