Interior Semi-Tech General discussion of interior for the Ford Ranger.

? for those with exploder consoles

Thread Tools
 
Search this Thread
 
  #1  
Old 10-05-2006
Ranger00's Avatar
Thread Starter
|
Member
Joined: Oct 2005
Posts: 178
Likes: 1
From: Allentown, PA
? for those with exploder consoles

hey those of you that have an exploder center console, I have a question. i just pulled one from a 97' and was wondering where you guys relocated the airback key switch to? And pics would be very appreciated. thanks a lot fellas!
 
  #2  
Old 10-05-2006
lifted97ranger's Avatar
Joined: Nov 2005
Posts: 1
Likes: 4
From: Charlestown, IN
just turn the air bag switch to the "on" position and zip tie it up behind the console.....i am going to mold it into the driver side lower console piece(the same spot as the power outlet on the passanger side of the console).......whenever i get the time and go-nads to cut a hole in my console....
 
  #3  
Old 10-05-2006
Trigger01's Avatar
RF Veteran
iTrader: (2)
Joined: Oct 2005
Posts: 18,788
Likes: 3
From: Knoxville, TN
I zip tied mine below the dash behing the console(Completely hidden). I can still acess it if I need to, but I haven't touched it since I put the console in. I was going to put it behing the cig lighter on the right side if the console, but I was 1" short of wire to do it.
 
  #4  
Old 10-05-2006
Ranger00's Avatar
Thread Starter
|
Member
Joined: Oct 2005
Posts: 178
Likes: 1
From: Allentown, PA
I still want o be able to turn it on and off. i have it off more than i have it on, im always driving alone :( Im gonna do the same thing as your thinking, but i want to see pics of what other people have done.
 
  #5  
Old 10-05-2006
lifted97ranger's Avatar
Joined: Nov 2005
Posts: 1
Likes: 4
From: Charlestown, IN
someone put their's in the power outlet on the passanger side....they took it out and replaced it with the switch.....you will have to stretch the wires a few inches by cutting an splicing wires, but it would be cool.....and cut a hole for the light...
 
  #6  
Old 10-05-2006
Ranger00's Avatar
Thread Starter
|
Member
Joined: Oct 2005
Posts: 178
Likes: 1
From: Allentown, PA
Originally Posted by lifted97ranger
someone put their's in the power outlet on the passanger side....they took it out and replaced it with the switch.....you will have to stretch the wires a few inches by cutting an splicing wires, but it would be cool.....and cut a hole for the light...
interesting, i might just try it. i have nothign to lose i got this free with my 8.8 rear axle i just bought today
 
  #7  
Old 10-05-2006
dangerranger619's Avatar
Joined: Sep 2006
Posts: 4
Likes: 0
From: San Diego, CA
I shaved it, haha, j/k. I turned my switch off 30 seconds after I got my truck and when I got my console I threw it behind it and forgot about it. Last time I got hit by one did more damage than good. Wish I could shut off the driver's side, oh well just have to get a billet wheel
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
hotrod88
OLD - Interior, Exterior, Electrical, & Misc.
27
05-11-2010 06:36 PM
d-rock
Interior Semi-Tech
37
12-25-2009 04:53 PM
dixie_boysles
General Ford Ranger Discussion
82
06-11-2009 09:27 PM
Danger06Ranger
Interior Semi-Tech
16
03-20-2009 07:54 AM
JaxRanger
Interior Semi-Tech
7
02-02-2008 11:13 PM



Quick Reply: ? for those with exploder consoles



All times are GMT -6. The time now is 12:32 PM.