General Technical & Electrical General technical and electrical discussion for the Ford Ranger that does not fit in any other sub-forum.

Switch for the domelight?

Thread Tools
 
Search this Thread
 
  #1  
Old 12-23-2007
Cody_288's Avatar
Thread Starter
|
Member
Joined: Oct 2005
Posts: 511
Likes: 0
From: Oil City, PA, Pittsfield, PA
Switch for the domelight?

My domelight will not switch off after the doors are closed. I have the drivers side door panel off as I think I have it limited down to that side.

Any suggestions?
 
  #2  
Old 12-23-2007
mach8's Avatar
Member
Joined: Jan 2007
Posts: 11
Likes: 0
From: mohave valley AZ
Hi, first thing you should try is spraying somr wd-40 or equivalent in the door latch and opening and shutting the door a few times to free it up , if that doesn't work you will find it located behind the door latch , pretty tight fit you will have to feel for it. Bob
 
  #3  
Old 12-23-2007
5speedin2.3's Avatar
Member
Joined: May 2005
Posts: 12
Likes: 0
From: Livonia, Mi
i took the switch off of my door latch and cleaned it with some rubbing alcohol and q tips.

its been a few years now and the problem is still fixed.
 
  #4  
Old 12-23-2007
Cody_288's Avatar
Thread Starter
|
Member
Joined: Oct 2005
Posts: 511
Likes: 0
From: Oil City, PA, Pittsfield, PA
thanks guys, tomorrow morning i'll go at it again
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jdcrush
Interior Semi-Tech
3
07-26-2008 09:45 PM
Hillyard
Interior Semi-Tech
7
06-18-2008 11:31 AM
04blackedge
Interior Semi-Tech
30
01-31-2008 12:37 AM
04blackedge
General Technical & Electrical
11
08-10-2007 07:41 AM
r0ng5
General Ford Ranger Discussion
29
12-11-2005 12:10 PM




All times are GMT -6. The time now is 10:17 AM.