Still having seat belt Chim/Buckle Problem. Need Help
#1
Still having seat belt Chim/Buckle Problem. Need Help
Ok so I made a thread a month or so ago with the problem I have and still havent fixed it. Here’s the problem, when I buckle my driver side seat belt in it doesnt register that it is clicked in so the chime goes off for a minute or so and repeats about every 15 mins. (Btw it’s a 06 4x4 ranger if that helps in anyway). I know how to disable the chime but that requires unbuckling and buckling the seatbelt and since it doesn’t register when its buckled I can’t disable the chime. I have tried spraying WD-40 into it like someone stated hoping to free up anything that could have been stuck but it didn’t work. I unplugged the wire under the seat and that didn’t do anything. I also notice that the red button has a crack so I'm guessing that has something to do with the problem. Any suggestions? I was looking into a new buckle but the cheapest I found one was $70 and I don’t even know if that would fix the problem. Is there a way I could cut the wires and tie the ends to gather to complete the circuit and fool the truck into thinking it’s plugged in?
#4
Thread
Thread Starter
Forum
Replies
Last Post
Elberto1999
Drivetrain Tech
2
10-17-2014 09:32 AM
Want to Buy: Passenger side seat belt buckle-TX
marc83
OLD - Interior, Exterior, Electrical, & Misc.
4
12-04-2012 10:52 AM