Making new fuel lines, what quick connects go where?
#1
Making new fuel lines, what quick connects go where?
Tried searching the forums but couldn’t find anything. Have an 03 edge 3.0 and had to replace the fuel pump. While replacing the fuel pump the quick connects (Or unions) broke from the 3/8 and 5/16 fittings running to the fuel filter. Tried to get new fuel lines from the local Ford dealership but they told me they are discontinued along with the quick connects (or unions). I don’t trust the dorman cut and splice repair kit. So now I’ve bought 10 ft of 5/16 nylon line and some Dorman unions. I noticed on the fuel filter that the previous owner must have broke the quick connects on that as well and rigged it with rubber fuel lines/clamps. Since I’m making new fuel lines, I lost track of what ends connect to what. Might be a stupid question but is the 3/8’s union fitting on the fuel pump side also the 3/8’s side on the fuel filter of that same line? (5/16 union from pump to 5/16 filter, etc). Any help is appreciated, I need to get this truck back on the road.
Edit: Nvm I figured it out. Mod can delete this thread.
Edit: Nvm I figured it out. Mod can delete this thread.
Last edited by David98; 06-07-2020 at 08:18 PM.
#2
RF Veteran
iTrader: (1)
#4
RF Veteran
iTrader: (1)
Thread
Thread Starter
Forum
Replies
Last Post
OldBlue86
General Technical & Electrical
10
01-16-2020 06:55 PM
Reyn
2.9L & 3.0L V6 Tech
3
11-23-2015 11:00 AM
Want to Buy: Fuel line between fuel filter & fuel pump - TN
iplayloudly
OLD - Interior, Exterior, Electrical, & Misc.
7
05-02-2012 03:10 PM