2005 Ford Ranger No Low Beam No High Beam
#1
Join Date: Jul 2009
Location: Blaine, Minnesota
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
2005 Ford Ranger No Low Beam No High Beam
Can only trigger lights by pulling back on the Multi-Function Switch, Doing a "Flash to pass" tried replacing the Multi-Function switch as well as the Headlight switch. Neither worked. I may need the wiring diagram for the headlight portion of my vehicle so I can check wires and their contiunance/voltage at the switches in the dash. I currently for some odd reason read 2 volts at the Headlights then when I turn them off it slowly goes down. I've had this electrical gremlin for awhile now and the lights were completely random. Now they don't want to work at all. So I've been falling back on my Hella 500's with HID's as a backup as well as my valance fogs. But I would like my headlights back in working order. At this point I'm thinking its a burnt up wire as I have HID's on my low beams with no relay :( but they have been this way for about 2 years now. Any help is appreciated especially the diagram.
THANKS!!!
THANKS!!!
#2
Join Date: Jul 2009
Location: Blaine, Minnesota
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
HouseofFinch
General Technical & Electrical
4
09-11-2022 04:13 PM
chopperchip
General Technical & Electrical
2
07-14-2014 10:48 AM
woo
General Technical & Electrical
9
12-28-2012 05:35 PM
rwsupra
OLD - Interior, Exterior, Electrical, & Misc.
19
07-19-2010 01:02 PM