Would my dad's euro's fit my truck
#1
#4
#7
ok, there is ONE PROBLEM
00-04 taillights have a 2 bulb settup
93-99 taillights have a 3 bulb settup
so im not sure how your aftermarket tails look, because normally you can just drill a new hole for the 3rd light, but if you dont have the room on the aftermarket tails (like no spot for the light on the bottom) i wouldnt recommend it
00-04 taillights have a 2 bulb settup
93-99 taillights have a 3 bulb settup
so im not sure how your aftermarket tails look, because normally you can just drill a new hole for the 3rd light, but if you dont have the room on the aftermarket tails (like no spot for the light on the bottom) i wouldnt recommend it
#8
Originally Posted by Gay-briel
ok, there is ONE PROBLEM
00-04 taillights have a 2 bulb settup
93-99 taillights have a 3 bulb settup
so im not sure how your aftermarket tails look, because normally you can just drill a new hole for the 3rd light, but if you dont have the room on the aftermarket tails (like no spot for the light on the bottom) i wouldnt recommend it
00-04 taillights have a 2 bulb settup
93-99 taillights have a 3 bulb settup
so im not sure how your aftermarket tails look, because normally you can just drill a new hole for the 3rd light, but if you dont have the room on the aftermarket tails (like no spot for the light on the bottom) i wouldnt recommend it
To put the 2-bulb taillights on a 3-bulb truck, you need to get a little converter at Autozone.. its designed to splice into a 3-bulb system and make a single bulb signal for a trailer (on vehicles that don't have a trailer connection.) It costs about $10-20 and instead of running the new connection to a trailer, you run the new connection to the single turn/brake/taillight bulb.
#9
Originally Posted by Wowak
Originally Posted by Gay-briel
ok, there is ONE PROBLEM
00-04 taillights have a 2 bulb settup
93-99 taillights have a 3 bulb settup
so im not sure how your aftermarket tails look, because normally you can just drill a new hole for the 3rd light, but if you dont have the room on the aftermarket tails (like no spot for the light on the bottom) i wouldnt recommend it
00-04 taillights have a 2 bulb settup
93-99 taillights have a 3 bulb settup
so im not sure how your aftermarket tails look, because normally you can just drill a new hole for the 3rd light, but if you dont have the room on the aftermarket tails (like no spot for the light on the bottom) i wouldnt recommend it
To put the 2-bulb taillights on a 3-bulb truck, you need to get a little converter at Autozone.. its designed to splice into a 3-bulb system and make a single bulb signal for a trailer (on vehicles that don't have a trailer connection.) It costs about $10-20 and instead of running the new connection to a trailer, you run the new connection to the single turn/brake/taillight bulb.
i put the 00's on my 93 i just cut off the turn signal and rev harnesses and put the rev plug on turn harness and it works just no rev lights. i didnt feel like doing all that other wiring stuff
Thread
Thread Starter
Forum
Replies
Last Post