valve cover gasket leak
#2
05-31-2021
Holy cow......................that wouldn't be just changing valve cover gasket
Better to do BOTH sides
Gasket cost $30-$50, for a set(two)
Labor would be 2.5 hours, so at $100/hour $250
So about $300 depending on labor costs in your area, which vary widely, $75 to $150/hour
A Mobile mechanic can do this job as well, would cost less as they don't have the overhead cost that a shop has
You can just do one side should run about 1.5hour labor
I would also have them change the PCV Valve, it should be changed every 3 oil changes, you can do it its pretty easy, and not an expensive part
Better to do BOTH sides
Gasket cost $30-$50, for a set(two)
Labor would be 2.5 hours, so at $100/hour $250
So about $300 depending on labor costs in your area, which vary widely, $75 to $150/hour
A Mobile mechanic can do this job as well, would cost less as they don't have the overhead cost that a shop has
You can just do one side should run about 1.5hour labor
I would also have them change the PCV Valve, it should be changed every 3 oil changes, you can do it its pretty easy, and not an expensive part
Last edited by RonD; 05-31-2021 at 11:49 AM.
Thread
Thread Starter
Forum
Replies
Last Post
talkforparts
OLD - Interior, Exterior, Electrical, & Misc.
0
07-20-2010 01:41 PM
FULLSCALE
General Technical & Electrical
2
07-11-2010 06:22 PM
