Trying to get tips Can't find my build anywhere 👿
#1
#2
RF Veteran
iTrader: (1)
Try this article: https://www.therangerstation.com/tec...y/Turbos.shtml
And here: https://www.therangerstation.com/tec...oInstall.shtml
The Ford T9 was not a good trans for Turbos, T5 would be better for down the road or an 1989-1997 M5OD-R1 from a 2.3l SOHC Ranger 2WD
And here: https://www.therangerstation.com/tec...oInstall.shtml
The Ford T9 was not a good trans for Turbos, T5 would be better for down the road or an 1989-1997 M5OD-R1 from a 2.3l SOHC Ranger 2WD
#4
RF Veteran
iTrader: (1)
You need the T5 bell housing from a 2.0l/2.3l SOHC engine, most common in Mustangs during that time frame
The T5 shifter is quite far back in most versions, so custom shift arm is needed, OR some use the shifter housing from the T5 used in S10 pickups, which moves the shifter farther forward
The T5 shifter is quite far back in most versions, so custom shift arm is needed, OR some use the shifter housing from the T5 used in S10 pickups, which moves the shifter farther forward
Thread
Thread Starter
Forum
Replies
Last Post
Wishiknewbutidont
2.3L & 2.5L I4 Tech
1
01-10-2021 12:55 PM