General Ford Ranger Discussion General discussion of the Ford Ranger that does not fit in any other sub-forum.

Second fuel pump?

Thread Tools
 
Search this Thread
 
  #1  
Old 12-11-2010
Nckdula's Avatar
Thread Starter
|
Member
Joined: Sep 2010
Posts: 178
Likes: 0
From: West Jordan UT
Second fuel pump?

For all you guys that have replaced fuel pumps.
Where is the second fuel pump? i already replaced the one that's actually in the tank, but i need to replace the other, but all be dammed if i can find it.
 
  #2  
Old 12-11-2010
evilclown312's Avatar
Member
iTrader: (3)
Joined: Dec 2008
Posts: 2,772
Likes: 1
From: Logan ohio
Second fuel pump?
 
  #3  
Old 12-11-2010
Nckdula's Avatar
Thread Starter
|
Member
Joined: Sep 2010
Posts: 178
Likes: 0
From: West Jordan UT
Originally Posted by evilclown312
Second fuel pump?
Yes, my truck and other of it's year, don't know about other years, but yes i have two fuel pumps, one in the tank itself, and one somewhere in the line (god knows where)
 
  #4  
Old 12-11-2010
morris's Avatar
RF Veteran
iTrader: (5)
Joined: Feb 2008
Posts: 7,841
Likes: 2
From: South Detroit.
do you have 2 tanks? it must just be a 88 thing. just follow the fuels lines and it should turn up eventually.
 
  #5  
Old 12-11-2010
evilclown312's Avatar
Member
iTrader: (3)
Joined: Dec 2008
Posts: 2,772
Likes: 1
From: Logan ohio
Ok after a quick google search i found out your second one is located on the frame, driver side under the cab.
 
  #6  
Old 12-11-2010
Nckdula's Avatar
Thread Starter
|
Member
Joined: Sep 2010
Posts: 178
Likes: 0
From: West Jordan UT
Originally Posted by evilclown312
Ok after a quick google search i found out your second one is located on the frame, driver side under the cab.
Wow i forgot i could Google it.
But thanks all check it out, see what's what, all get back to ya.
 
  #7  
Old 12-11-2010
Pless215's Avatar
Member
Joined: Mar 2008
Posts: 473
Likes: 1
From: Dewy Rose, GA
Yes, the 2.9's have a primary pump in the fuel tank, and a secondary pump on the frame rails
 
  #8  
Old 12-11-2010
stangdroptop351's Avatar
Joined: Feb 2010
Posts: 511
Likes: 0
From: Scottdale,PA
yep its by the crossmember on the drivers side on the inside of the frame it has a metal shield around it, i used 2 have a 87 with the 2.9 & had 2 change that pump
 
  #9  
Old 12-11-2010
Pless215's Avatar
Member
Joined: Mar 2008
Posts: 473
Likes: 1
From: Dewy Rose, GA
My dad has been lucky with his. Right now it has almost 290k on it and to my knowledge with the stock pumps. And I probably just cursed it
 
  #10  
Old 12-11-2010
stangdroptop351's Avatar
Joined: Feb 2010
Posts: 511
Likes: 0
From: Scottdale,PA
shhhhhh, lol
 
  #11  
Old 12-12-2010
Nckdula's Avatar
Thread Starter
|
Member
Joined: Sep 2010
Posts: 178
Likes: 0
From: West Jordan UT
Ok i have located the fuel filter, and the in-line fuel pump.
And boy all tell ya... those two things are gonna be a b*tch to replace, mainly cause I'm a bigger guy, and don't have much clearance.
Thank god for ramps!
 
  #12  
Old 12-12-2010
evilclown312's Avatar
Member
iTrader: (3)
Joined: Dec 2008
Posts: 2,772
Likes: 1
From: Logan ohio
Glad you could find them.
 
  #13  
Old 12-12-2010
Nckdula's Avatar
Thread Starter
|
Member
Joined: Sep 2010
Posts: 178
Likes: 0
From: West Jordan UT
Originally Posted by evilclown312
Glad you could find them.
Thanks... but i would of rather kept looking for them in the days, than found them and saw what hellish position they are in under the cab. lol
 
  #14  
Old 12-12-2010
stangdroptop351's Avatar
Joined: Feb 2010
Posts: 511
Likes: 0
From: Scottdale,PA
ya i dont quite remember were mine was i thought it was by the crossmember on the inside of the frame. it was in 2002 i think when i changed mine & traded the truck in on my 04 in 2004 so its been a few yrs
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
00Red
2.9L & 3.0L V6 Tech
1
05-28-2013 10:00 PM
TheRealestWhiteBoy
General Technical & Electrical
12
01-19-2013 08:05 PM
iplayloudly
OLD - Interior, Exterior, Electrical, & Misc.
7
05-02-2012 04:10 PM
fedupdon
General Technical & Electrical
1
01-31-2011 07:04 AM
jakD
General Technical & Electrical
3
10-15-2010 12:23 PM




All times are GMT -6. The time now is 03:00 PM.