door lock and keys
#1
door lock and keys
Before I got my Ranger someone tampered with the drivers door cylinder lock. Where is the best place to purchase 2 cylinders and bezels assemblies? Is there a place I can send a spare key and have the key still match my Ignition AND get new assemblies too? oh By the way it is a 94 XLT standard cab w/ manual locks.
#2
Any decent local locksmith should be able to re-key a set of door lock cylinders to match your current key. So you could just get some cylinders from a junkyard or a new set from any auto parts store and take them and your current ignition key to the locksmith and have him re-key the door locks and make some new keys. Then go home and swap out the door cylinders. To get the cylinders rekeyed, and new keys made will probably run you about 25 bucks plus the cost of the new lock cylinders (junkyard about 5 bucks, parts store about 30 bucks)
OR... you could buy a complete new matching set of ignition and door lock cylinders with all new keys and just change everything in one shot. A whole new set will probably run you around 50-75 bucks. I usually find this option simpler.
OR... you could buy a complete new matching set of ignition and door lock cylinders with all new keys and just change everything in one shot. A whole new set will probably run you around 50-75 bucks. I usually find this option simpler.
#3
Yes +1 ^^^^
They come in Chrome or black and you can just get one, the plastic lever is reverseable for drivers or passenger door use.
And yes locksmith can rekey new or used to match your current key
You can do it without remove door panel.
Tab to release lock is on the back side of the door, it slides out and then lock cylinder can be pulled out and the locking rod will come out enough to release it, hold on to it, lol.
install rod in new lock and slide it back in, reinstall tab to hold lock
But removing door panel is not a big deal, roll up window all the way first
They come in Chrome or black and you can just get one, the plastic lever is reverseable for drivers or passenger door use.
And yes locksmith can rekey new or used to match your current key
You can do it without remove door panel.
Tab to release lock is on the back side of the door, it slides out and then lock cylinder can be pulled out and the locking rod will come out enough to release it, hold on to it, lol.
install rod in new lock and slide it back in, reinstall tab to hold lock
But removing door panel is not a big deal, roll up window all the way first
#5
That's not a great idea, for door lock keys don't go junkyard. Call any locksmith near to your location, they can help you in having the new keys for your ranger.Locksmith Toronto experts helped me out in getting the pair of keys.
#6
That's not a great idea, for door lock keys don't go junkyard. Call any locksmith near to your location, they can help you in having the new keys for your ranger.Locksmith Toronto experts helped me out in getting the pair of keys.
Thread
Thread Starter
Forum
Replies
Last Post
kaveman91
General Ford Ranger Discussion
1
08-05-2016 11:01 AM