Put in an Ebay order: HID 9007-4 + Relay's (CHEAP Link)!
#27
Hah dang, didnt notice that - I though tthey were incandescant ones!
Did you order the ones off Ebay - LED 15" bar with the high/low that you can tap into the brakes? :-)
Edit:
Hah was just laughing about the black truck in the pictures - it swaps position every new set of pictures :-p Thats my '88 Ranger I just got running again - 2.3L, 2wd. 5 speed (4+overdrive)... great condition minus the paint on the exterior - dove under it to do some inspecting and theres not even any rust on the frame minus the standard surface stuff from a little moisture here and there.. I missed drivin it :-)
Did you order the ones off Ebay - LED 15" bar with the high/low that you can tap into the brakes? :-)
Edit:
Hah was just laughing about the black truck in the pictures - it swaps position every new set of pictures :-p Thats my '88 Ranger I just got running again - 2.3L, 2wd. 5 speed (4+overdrive)... great condition minus the paint on the exterior - dove under it to do some inspecting and theres not even any rust on the frame minus the standard surface stuff from a little moisture here and there.. I missed drivin it :-)
#28
Link me these hi/lo clearence lamps...THAT would be hella awesome.
#29
http://cgi.ebay.com/ebaymotors/15-Sl...Q5fAccessories
Dirt cheap - I'm going to be ordering up 2 more and tieing them into my left and right brake's... that way they will blink when I hit the brakes, and when I click my turn signals - still need to run wiring to my third brake light in the middle one so it will mimic the brake's without blinking on and off with a turn signal
#30
hmmmm...found it. I kinda like it! Need to find red lense, then I may be set on it I suppose.
LED combination 3 light bar center brake light CLEAR:eBay Motors (item 290337646177 end time Aug-13-09 18:04:21 PDT)
EDIT: bam! http://cgi.ebay.com/ebaymotors/LED-c...Q5fAccessories
LED combination 3 light bar center brake light CLEAR:eBay Motors (item 290337646177 end time Aug-13-09 18:04:21 PDT)
EDIT: bam! http://cgi.ebay.com/ebaymotors/LED-c...Q5fAccessories
#31
The one I linked to right there actually has a red, white, and black.. red = high, white = low, black = ground.. lets you tie into your brake light high/low so you can make it blink with that specific turn signal and such - My plan is to have 3 of these.. actually jsut ordered 2, and a can of nightshade - and going to paint the area under there black - nightshade the LED's so they wont blind so much when I hit the brakes.. and give them a stealthy look under there when they arent on.. one in the middle on the third brake light wires.. and one hugging each side workign with that ides brake light.
#33
ohhh re-click that link, i edited it right after you c licked it I bet -- 15" Slimline 3 LED Red ID Light Bar Trailer Truck RV 80:eBay Motors (item 270318887154 end time Aug-13-09 1557 PDT)
If the link doesnt work.. search up "15" Slimline 3 LED Red ID Light Bar Trailer Truck RV 80" in the store =)
If the link doesnt work.. search up "15" Slimline 3 LED Red ID Light Bar Trailer Truck RV 80" in the store =)
#35
lol thats a wrong picture on there.. its got three that was sent to me - low, high, and ground.. I think they are using a generic picture on that one probably, lol
Lol, and with thread hackign I dont mind at all - Im just waiting on those several HID haters to start spamming about me trying to kill people.. yadda yadda yadda lol :-p
Lol, and with thread hackign I dont mind at all - Im just waiting on those several HID haters to start spamming about me trying to kill people.. yadda yadda yadda lol :-p
#38
#40
This is how a proper HID kit works (With a relay)
Battery to Relay
Relay to Ballast
Stock Wiring plugs Into Relay (For High/Low Signals)
Ballast plugs into HID Bulb
Thats all there is to it - minus of course.. you have to mount the ballast and all that, slightly more work depending on application.
Battery to Relay
Relay to Ballast
Stock Wiring plugs Into Relay (For High/Low Signals)
Ballast plugs into HID Bulb
Thats all there is to it - minus of course.. you have to mount the ballast and all that, slightly more work depending on application.
Thread
Thread Starter
Forum
Replies
Last Post
Want to Buy: 9005 HID kit and 9007 HID kit
Police Interceptor
OLD - Interior, Exterior, Electrical, & Misc.
0
12-14-2010 02:04 PM
Want to Buy: WTB hi-low 9007 HID's LV NV
Tys 4x4 FTW
OLD - Interior, Exterior, Electrical, & Misc.
12
01-02-2010 11:04 AM
For Sale: Xentec 6000k HID 9007 (NC)
Rapala
OLD - Interior, Exterior, Electrical, & Misc.
6
12-14-2009 12:03 PM
0RangerEdge2
OLD - Interior, Exterior, Electrical, & Misc.
46
03-21-2009 05:22 PM