pic request
#6
#7
Naw dude, thats why every time I clean the truck I make sure that there is nothing under it. I have had it on for almost 2 years now and still nothing. Thanks.
#8
#10
#14
#18
I mounted mine on the front of the bed, between the cab and the bed. It was a B*T*H to install because of the lack of room. With 20-20 hindsight, the install would have been a good deal easier if I had undone the 4 bolts holding the bed and slid it hack 6" or so.
As for the single vs duel antenna argument. Blackedge is correct. But only partially so. Performance wise, one antenna will do as well or better than 2. The distance between the 2 antennas is important (9 feet is optimal. With 5 feet being the minimum.) and Rangers just aren't wide enough for that minimum distance required. However, even on something like an 18 wheeler, there are so many problems with the setup, that a single antenna will work just as well.
If you're interested, here's a link explaining some of the problems involved.
http://www.ask.com/bar?q=CB+Antenna+Installation&page=1&qsrc=6&zoom=B est+%3CKW%3ECB+Antenna%3C%2FKW%3E|%3CKW%3ECB%3C%2F KW%3E+Radio+%3CKW%3EAntennas%3C%2FKW%3E|Mounting+a +%3CKW%3ECB+Antenna%3C%2FKW%3E&ab=6&u=http%3A%2F%2 Fwww.firestik.com%2FTech_Docs.htm
Having said that, I too like the LOOK of dual antennas. So I plan to put 2 on my truck. The one on the passenger side will be connected to the CB. The drivers side will be for the trucks AM/FM radio. I'll then remove the antenna from the passenger side front fender.
Still have to do some reading/research on this setup. Not sure if an antenna designed for a CB will run an AM/FM radio. If they won't I'll just run a splitter on the passenger side and the drivers side will just be a dummy.
As for the single vs duel antenna argument. Blackedge is correct. But only partially so. Performance wise, one antenna will do as well or better than 2. The distance between the 2 antennas is important (9 feet is optimal. With 5 feet being the minimum.) and Rangers just aren't wide enough for that minimum distance required. However, even on something like an 18 wheeler, there are so many problems with the setup, that a single antenna will work just as well.
If you're interested, here's a link explaining some of the problems involved.
http://www.ask.com/bar?q=CB+Antenna+Installation&page=1&qsrc=6&zoom=B est+%3CKW%3ECB+Antenna%3C%2FKW%3E|%3CKW%3ECB%3C%2F KW%3E+Radio+%3CKW%3EAntennas%3C%2FKW%3E|Mounting+a +%3CKW%3ECB+Antenna%3C%2FKW%3E&ab=6&u=http%3A%2F%2 Fwww.firestik.com%2FTech_Docs.htm
Having said that, I too like the LOOK of dual antennas. So I plan to put 2 on my truck. The one on the passenger side will be connected to the CB. The drivers side will be for the trucks AM/FM radio. I'll then remove the antenna from the passenger side front fender.
Still have to do some reading/research on this setup. Not sure if an antenna designed for a CB will run an AM/FM radio. If they won't I'll just run a splitter on the passenger side and the drivers side will just be a dummy.
Last edited by MemphisSenior; 02-22-2009 at 03:54 PM.
#20
I need to work on where to put my CB though....I'm not sure I'm happy with this location...
Last edited by crawly1025; 02-22-2009 at 05:22 PM.
#24
I had dual 8 foot SS whips on my 97 2wd. Only one was functional, but it completed the RC Car look LMAO I thought it looked great and it got out really nice. Wilson makes an excellent antenna. I'm running a Firestik on the back of mine similar to Trigger's setup. Same mount. I don't use it much, but I have some friends that drive rigs that I see sometimes in the morning on the way to work during my hour commute, so it makes it entertaining. Running duals would be ok if you only plan on utilizing one of them...i.e. only connecting one and the other would be for looks. Just make sure that whatever you do, you peak and tune it yourself or get it peaked and tuned or you might fry the radio and it will affect your transmit/receive power. It's nice to have friends that drive rigs that have that have CB tuning equipment lying around lol
I need to work on where to put my CB though....I'm not sure I'm happy with this location...
I need to work on where to put my CB though....I'm not sure I'm happy with this location...