Custom Sub boxes
#13
#15
Whatever. I know what I have and am not going to sit in a pissing contest with people I do not know nor give two ****s about. Catch me at a competition in Ohio or even set a date sometime within about 100 miles of Columbus Ohio and we can see what you have to push against it. Till then whatevers, whatever.
#19
care to explain what kind of equipment your running? i'm an hour from you and know someone in columbus with a TL to test it on, i'm sure if its true you wouldn't mind putting a friendly wager on would you?
#23
Columbus is fine. Anytime after the 27th of this month is good. As far as wager that's cool too. Wanna go titles, cash, equipment whatever let me know. Yes it's all Memphis. M class subs running off a 4000 cheater MoJo. Horizon Audio is the shop I was sponsored through and They did the whole install.
Wasn't this thread about the enclosures originally?
Wasn't this thread about the enclosures originally?
#24
#25
I'll do that man. I am honestly not sure on the port tune of the box. It is slightly vented and they are all individual enclosures not ported together. What keeps my spl in is the foam fill in the core supports, and the rear side walls. The doors are also foam filled with the 5x7's mounted in cups. The fire wall, floor, rear wall, and roof are all lined with Dynomat then adhesive sprayed holing 1/8 inch lexan behond the moldings and the fabric. The power all comes from a 400 amp Ohio generator alternator. I have 000 feeding the truck battery to the relay/isolator. From there its 000 to a kinetic gell cell battery. There is a 200 amp CB after each battery. From the second Bat it goes 000 to a distro block. Runs 00 to the Mojo then runs on to the other PR 250's.
Anything you wanna know just ask.
Anything you wanna know just ask.