4.0L OHV & SOHC V6 Tech General discussion of 4.0L OHV and SOHC V6 Ford Ranger engines.

My Intake Manifold....

Thread Tools
 
Search this Thread
 
  #1  
Old 10-04-2007
dngerzone's Avatar
Thread Starter
|
Member
Joined: Sep 2007
Posts: 342
Likes: 0
From: Tacoma, Washington
Icon13 My Intake Manifold....

SO a couple of days ago i noticed a very very small engine leak... the drop was the size of not even a pebble... it is coming off of the back of the intake manifold .... NO BUENO... has anyone heard of this problem before.....Hope i just dont have bad luck.... please reply..
 
  #2  
Old 10-05-2007
bgrd351's Avatar
Member
Joined: Aug 2007
Posts: 19
Likes: 0
From: Jacksonville, Fl
puddle of what kind of liquid?? I just went thru a leak issue times 2 due to my own ignorance and stupidity. I had the usual vaccum leak due to the paper gasket under the fuel rail on the 4.0 OHV and replaced it and the upper intake gasket but not the injector orings...so the orings leak...DOH!!! So apart it all came again and new orings went on...no leak since... *knock on wood*
 
  #3  
Old 10-05-2007
lifted97ranger's Avatar
Joined: Nov 2005
Posts: 1
Likes: 4
From: Charlestown, IN
if it is oil, then you have problems......oil shouldn't be in the intake period....
 
  #4  
Old 10-08-2007
dngerzone's Avatar
Thread Starter
|
Member
Joined: Sep 2007
Posts: 342
Likes: 0
From: Tacoma, Washington
it is a leak that was able to mix with the radiator fluid.....however tht happens...
 
  #5  
Old 10-08-2007
lifted97ranger's Avatar
Joined: Nov 2005
Posts: 1
Likes: 4
From: Charlestown, IN
if you have oil and antifreeze mixed together, then you have a blown head gasket....
 
  #6  
Old 10-08-2007
racersforford's Avatar
Member
Joined: Sep 2007
Posts: 21
Likes: 0
From: CF, Ohio
Originally Posted by lifted97ranger
if you have oil and antifreeze mixed together, then you have a blown head gasket....
for sure, or even worse (and in my case) warped and cracked heads. has your motor ever gotten really hot, like in the red of the temp. gauge? also, check your oil, is it kinda milky? you will notice a distinct difference, it's actually whiteish.
 
  #7  
Old 10-09-2007
dngerzone's Avatar
Thread Starter
|
Member
Joined: Sep 2007
Posts: 342
Likes: 0
From: Tacoma, Washington
..oddly my motor has never gotten tht hott. and i have checked my oil level tons of times and it looks like motor oil..(kinda general i kno...) but it does not have tht milky look.......
 
  #8  
Old 10-09-2007
lifted97ranger's Avatar
Joined: Nov 2005
Posts: 1
Likes: 4
From: Charlestown, IN
your heads don't have to get that hot....if your engine is at normal operating temp and you run through a deep puddle of water or spray water on the engine it can warp the heads...
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
fordboston
4.0L OHV & SOHC V6 Tech
6
01-25-2010 09:37 PM
ringer4x4
4.0L OHV & SOHC V6 Tech
7
09-27-2008 10:46 AM
SONICEDGE03
4.0L OHV & SOHC V6 Tech
12
09-28-2006 10:57 AM
JoshW
4.0L OHV & SOHC V6 Tech
7
03-28-2006 10:05 PM
JoshT
8-Cylinder Tech
7
10-16-2005 04:34 PM



Quick Reply: My Intake Manifold....



All times are GMT -6. The time now is 06:37 AM.