Ranger-Forums - The Ultimate Ford Ranger Resource

2.9L & 3.0L V6 Tech General discussion of 2.9L and 3.0L V6 Ford Ranger engines.

PCV Hose Question

Thread Tools
 
Search this Thread
 
  #1  
Old 08-30-2011
burme10's Avatar
Thread Starter
|
Member
Joined: Jul 2011
Posts: 41
Likes: 0
From: MO
PCV Hose Question
I noticed that the PCV valve hose is collapsed when the engine is running so its like flat pinched together. I know its a vacuum line but is it supposed to do that??
 
Reply Like
  #2  
Old 08-30-2011
muscleford's Avatar
Member
Joined: Apr 2008
Posts: 201
Likes: 0
From: Streetsboro, Ohio
No it should not do that
 
Reply Like
  #3  
Old 08-30-2011
FULLSCALE's Avatar
Level III Supporter
iTrader: (12)
Joined: Mar 2009
Posts: 8,184
Likes: 4
From: Clinton, Ontario
No it shouldn't... get it replaced!
 
Reply Like
  #4  
Old 08-30-2011
burme10's Avatar
Thread Starter
|
Member
Joined: Jul 2011
Posts: 41
Likes: 0
From: MO
Any particuliar hose? The hose on it now isnt very heavy
 
Reply Like
  #5  
Old 08-31-2011
OTRtech's Avatar
Member
Joined: Mar 2007
Posts: 2,598
Likes: 11
From: Upstate,NY
If it's drawing that much on the hose then the PCV valve is stuck or plugged.
Change the valve.
 
Reply Like
  #6  
Old 08-31-2011
burme10's Avatar
Thread Starter
|
Member
Joined: Jul 2011
Posts: 41
Likes: 0
From: MO
Brand new just replaced it
 
Reply Like
  #7  
Old 08-31-2011
Dan R's Avatar
Member
Joined: May 2011
Posts: 23
Likes: 0
From: Santa Clara, CA
A good auto store should stock bulk (Goodyear) 3/8 fuel/emissions hose.
It is thick enough to withstand collapsing on vacuum.
Cost $1.40 vs. $80? at dealer.
 
Last edited by Dan R; 09-01-2011 at 09:23 PM.
Reply Like
  #8  
Old 08-31-2011
burme10's Avatar
Thread Starter
|
Member
Joined: Jul 2011
Posts: 41
Likes: 0
From: MO
The hose I'm talking about is the short one that goes from the pcv valve to the intake
 
Reply Like
  #9  
Old 09-01-2011
burme10's Avatar
Thread Starter
|
Member
Joined: Jul 2011
Posts: 41
Likes: 0
From: MO
Bump..
 
Reply Like
  #10  
Old 09-01-2011
StxDangerRanger's Avatar
RF Veteran
iTrader: (2)
Joined: Dec 2010
Posts: 6,315
Likes: 6
From: Michigan
Isn't that part of the whole PCV assembly?
Just go to your parts store and ask them, there computer will tell you which hose will fit if it isn't part of the assembly.
 
Reply Like
  #11  
Old 09-01-2011
korey89's Avatar
Member
iTrader: (2)
Joined: Mar 2008
Posts: 4,672
Likes: 5
From: South, FL
This has come up a few times on here before. The only real option is going to be to go to Ford and buy it, they sell one that is updated and has ribbing to reinforce it.
 
Reply Like
  #12  
Old 09-01-2011
burme10's Avatar
Thread Starter
|
Member
Joined: Jul 2011
Posts: 41
Likes: 0
From: MO
The short hose on the 3.0 that goes from the intake that's zip tied on and goes down to the pcv valve.
 
Reply Like
  #13  
Old 09-01-2011
StxDangerRanger's Avatar
RF Veteran
iTrader: (2)
Joined: Dec 2010
Posts: 6,315
Likes: 6
From: Michigan
Originally Posted by burme10
The short hose on the 3.0 that goes from the intake that's zip tied on and goes down to the pcv valve.
Korey and I both know the hose your talking about.
If you go to the Ford Dealer, they'll have a reenforced hose that won't collapse anymore.
 
Reply Like
  #14  
Old 09-01-2011
burme10's Avatar
Thread Starter
|
Member
Joined: Jul 2011
Posts: 41
Likes: 0
From: MO
Since that hose is collapsed what harm is it causing?
 
Reply Like
  #15  
Old 09-01-2011
burme10's Avatar
Thread Starter
|
Member
Joined: Jul 2011
Posts: 41
Likes: 0
From: MO
How much is it? I called earlier and they said 80+ bucks
 
Reply Like
  #16  
Old 09-01-2011
korey89's Avatar
Member
iTrader: (2)
Joined: Mar 2008
Posts: 4,672
Likes: 5
From: South, FL
It's a lot. You have to buy the tube that it's connected to as well. It doesn't come separate
 
Reply Like
  #17  
Old 09-01-2011
Prerunner-Ranger's Avatar
Level I Supporter
Joined: Feb 2008
Posts: 2,312
Likes: 4
From: Lancaster, CA.
Got mine from dealer, they have started stocking a beefy replacement.
 
Reply Like
  #18  
Old 09-01-2011
01RangerEdge's Avatar
Scrambles the DeathDealer
iTrader: (11)
Joined: Jul 2009
Posts: 7,579
Likes: 5
From: Jackson, MO
Is this similar to the cracking PCV elbow on the 4.0's?

If so, Racer Parts Wholesale sells a poly urethane elbow for like $10 or something
 
Reply Like
  #19  
Old 09-04-2011
burme10's Avatar
Thread Starter
|
Member
Joined: Jul 2011
Posts: 41
Likes: 0
From: MO
Update: Changed it out with Dorman #46023...20 bucks compared to 80 at Ford.
 
Reply Like
  #20  
Old 09-04-2011
Prerunner-Ranger's Avatar
Level I Supporter
Joined: Feb 2008
Posts: 2,312
Likes: 4
From: Lancaster, CA.
lol
 
Reply Like
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
PCV Valve Hose Assembly -- HELP!
Prerunner-Ranger
2.9L & 3.0L V6 Tech
6
02-08-2018 07:36 PM
97 ranger 2.3L PCV valve hose
rchoungping
SOHC - 2.3L & 2.5L Lima Engines
4
10-31-2011 10:44 AM
pcv hose
BigEdge126
2.9L & 3.0L V6 Tech
8
08-16-2010 07:06 PM
my pcv hose update
BigEdge126
2.9L & 3.0L V6 Tech
2
07-04-2010 07:35 PM
PCV hose question....
buckgnarly
4.0L OHV & SOHC V6 Tech
10
05-14-2008 04:50 PM
Back to Subforum
2.9L & 3.0L V6 Tech
View Next Unread
2002 - Shut of @ Idle




Advanced Search
Quick Reply: PCV Hose Question


Reply Closed Thread Share

All times are GMT -6. The time now is 11:28 AM.