Front end shimmy
#1
Front end shimmy
I just replaced both front wheel hub assemblies with ABS sensors and the truck will shimmy for a bit and quit when I let off the gas. Not really a certain speed at which it happens. The steering wheel shakes really really bad. The new assemblies are tight. Would the tires be causing this? I've got to get new ones anyway before the snow flies.
#2
it sounds like alignment.
if you take the hubs apart, you could very easily have moved the alignment out when putting things back together.
but also check to make sure you reassembled everything correctly and its all tight. the last thing you want to happen is losing an axle while driving
if you take the hubs apart, you could very easily have moved the alignment out when putting things back together.
but also check to make sure you reassembled everything correctly and its all tight. the last thing you want to happen is losing an axle while driving
Thread
Thread Starter
Forum
Replies
Last Post
01_Camaro_SS
Exterior Semi-Tech
7
12-20-2016 05:00 PM
zabeard
General Ford Ranger Discussion
13
07-05-2007 06:47 PM
FMD
General Ford Ranger Discussion
7
01-10-2007 08:51 PM