i need some engine specs for a project im doing, i did a lot of research and couldnt find too much and i cant exactly take my truck apart to measure them myself. here's what i need:
-compression height/pin height
-rod ratio or rod length
-valve lift (both)
-rev limit engagement point and rev limit
-piston mass
-crankshaft mass
-conrod mass
-cam lobe separation angle

anything you can help with would be great!

edit: i cant believe i forgot to mention, this is for the 2.5l engine in the 2000 ranger

 

Welcome to the forum

2.3l SOHC Lima engine I assume

Place to get engine info is Esslinger Engineering: https://esslingeracing.com/

Mustang Forums as well, they used the same 2.3l Lima engine

Just a heads up Rangers also used a 2.3l DOHC Duratec engine, totally different engine, so "Ranger 2.3l" search will get mixed results

 

sorry, i forgot to mention that this is for the 2.5l engine

 

Only thing different will be the crank and connecting rod length, everything else is the same as the 2.3l, heads, pistons, bearings and block